SET-3G is an epoxy-based anchoring adhesive with high design strength and proven performance. The adhesive is a 1:1 ratio, two-component, anchoring adhesive formulated for anchoring threaded rod and rebar into concrete (cracked and uncracked). This low-odor adhesive is a uniform gray color when mixed properly and has a substrate installation temperature range from 40F (4C) to 100F (38C). SET-3G installs and performs in a variety of environmental conditions and temperature extremes and is suitable for use in dry concrete, water-saturated concrete, water-filled holes and submerged concrete.
Exceptional performance - superior bond strengths permit ductile solutions in high seismic areas
Recognized per ICC-ES AC308 for post-installed rebar development and splice length design provisions
Design flexibility - improved sustained load performance at elevated temperature
Jobsite versatility - can be specified for all base material conditions when in-service temperatures range from - 40F (-40C) to 176F (80C)
(1) EMN22i mixing nozzle and (1) nozzle extension are supplied with each cartridge
Modification or improper use of mixing nozzle may impair SET-3G adhesive performance
Tested in accordance with ICC-ES AC308 (ESR-4057), ACI 355.4 and applicable ASTM test methods
Approved for installation with multiple vacuum-drill bit systems without further hole cleaning, see code report (ESR-4057) for approved systems