PC-Concrete Anchoring and Crack Filling Epoxy - is the epoxy chosen to repair cracks in warehouse and factory floors. Dispense and apply using a standard size caulking gun. Cures hard enough to drive over within 3 hours at standard temperature. Nothing stronger for your anchoring applications. PC-Concrete is a two component (1:1 ratio), 100 percent solids, high modulus, and structural epoxy paste. PC-Concrete is a solvent free, no odor, high strength, moisture insensitive epoxy system. The resin and hardener are uniformly dispensed from a cartridge system and mixed through a mixing nozzle using a standard size caulking gun. . Can be applied to wet and underwater surfaces.
Suitable for application in cracks or to anchor bolts or rebar to concrete
Apply to dry or wet surfaces for flexible use
Non-shrinking, cured formula doesn't need to be reapplied
Has 2 mixing nozzles and can be dispensed with a standard caulk gun
Actual paint colors may vary from on-screen and printer representations